LFSC3GA80E-5FCN1152C

LFSC3GA80E-5FCN1152C Overview

A few of the high-performance features that the LFSC3GA80E-5FCN1152C is designed to provide in a cheap FPGA fabric include a high-performance DSP architecture, high-speed SERDES (Serializer/Deserializer), and high-speed source synchronous interfaces. This combination of advances in device architecture and the use of 40 nm technology makes the devices suitable for high-volume, high-speed, and low-cost applications. LFSC3GA80E-5FCN1152C has a look-up-table (LUT) capacity of 84K logic components and supports up to 365 users I/O. A high-performance DSP architecture, high-speed SERDES (Serializer/Deserializer), and high-speed source synchronous interfaces are just a few of the high-performance characteristics that LFSC3GA80E-5FCN1152C is intended to offer in a low-cost FPGA fabric. The utilization of 40 nm technology in conjunction with improvements in device architecture makes the devices appropriate for high-volume, high-speed, and low-cost applications. LFSC3GA80E-5FCN1152C supports up to 365 user I/O and has a look-up-table (LUT) capacity of 84K logic components.

The pre-engineered source synchronous logic of LFSC3GA80E-5FCN1152C supports a broad range of interface protocols, including DDR2/3, LPDDR2/3, XGMII, and 7:1 LVDS. Another component of LFSC3GA80E-5FCN1152C is high-speed SERDES with particular Physical Coding Sublayer (PCS) features. Due to their high jitter tolerance and low transmit jitter, the SERDES plus PCS blocks can be used to support a number of popular data protocols, such as PCI Express, Ethernet (XAUI, GbE, and SGMII), and CPRI. The SERDES's Receive Equalization settings and Transmit De-emphasis with pre- and post-cursors make it suitable for transmission and reception via a range of media. Along with bit-stream encryption, dual boot support, and TransFR field upgrading features, LFSC3GA80E-5FCN1152C also provides flexible, trustworthy, and secure configuration options. LFSC3GA80E-5FCN1152C has improved in the SERDES as compared to ECP5UM devices. The SERDES can now run at up to 5 Gb/s of data rate thanks to these upgrades.

Pin-to-pin compatibility exists between the ECP5UM product and devices from the LFSC3GA80E-5FCN1152C. These allow you to transfer designs for devices with better performance from ECP5UM to ECP5-5G products. The Lattice Diamond design software enables efficient implementation of large complex designs using LFSC3GA80E-5FCN1152C. Support for synthesis libraries for LFSC3GA80E-5FCN1152C is available in popular logic synthesis tools. Diamond tools use the output from the synthesis tool and the constraints from its floor planning tools to install and route the design in the ECP5/ECP5-5G device. The tools take the time from the routing and back-annotate it into the design for timing verification.

Lattice provides a range of pre-engineered IP (Intellectual Property) modules for LFSC3GA80E-5FCN1152C. When using these flexible soft-core IPs as standardized building blocks, designers have more freedom to concentrate on the unique aspects of their designs, which increases productivity.

LFSC3GA80E-5FCN1152C Specifications