EPC2LI20N

EPC2LI20N Overview

The configuration data must be loaded each time an SRAM-based device is powered on in order to configure the system. When powered on, the flash memory device EPCS1SI8N-008-X may store configuration information for FPGA configuration. Every FPGA that supports the AS x1 configuration scheme is compatible with this EPCS1SI8N-008-X device. For an 8-pin SOIC package, you can move vertically from an EPCS1 device to an EPCS4 or EPCS16 device. For a 16-pin SOIC package, you can vertically switch between an EPCS64 device and an EPCS128 device. The new data decompression capability that is supported allows you to select which EPCS device to save the configuration data on when configuring your FPGA.

EPC2LI20N Features

• Easy-to-use four-pin interface

• Low cost, low-pin count, and non-volatile memory

• Low current during configuration and near-zero standby mode current

• Enables the Nios® processor to access unused flash memory through AS memory interface

• In-system programming support with SRunner software driver

The electronic component, packaged in SOIC-16, is a flash memory with a memory size of 12 Mbits. It is designed for surface mount technology (SMT) or surface mount devices (SMD). The packaging comes in a tube format, ensuring easy handling and storage. With a maximum operating temperature of +85°C and a minimum of -40°C, it can withstand varying environmental conditions. This flash memory operates at an impressive frequency of 40 MHz, enabling fast and efficient data processing. Whether used in consumer electronics or industrial applications, this versatile component offers reliable performance and high-speed data transfer capabilities. 

EPC2LI20N Applications

• IP and Smart camera

• Video and night vision equipment

• LTE radio and baseband

• Multifunction printers

EPC2LI20N Specifications