Every time an SRAM-based device is powered on, the configuration data must be loaded in order to configure the system. The EPCS device is a flash memory device that, once powered on, can store configuration data used for FPGA configuration. All FPGAs that support the AS x1 configuration scheme can support the EPCS device. You can transition vertically from the EPCS1 device to the EPCS4SI8N-JHUO or EPCS16 device for an 8-pin SOIC package. You can switch vertically from an EPCS64 device to an EPCS128 device for a 16-pin SOIC package. You can choose which EPCS device to use to store the configuration data for configuring your FPGA with the new data decompression feature supported.
Supports active serial (AS) x1 configuration scheme
Easy-to-use four-pin interface
Low cost, low pin count, and non-volatile memory
Low current during configuration and near-zero standby mode current
IP and Smart camera
Video and night vision equipment
LTE radio and baseband
Multifunction printers
Broadcast camera
| Specification | Value |
|---|---|
| Programmable Type | In System Programmable |
| Memory Size | 4MB |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40℃ ~ 85℃ |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
Buy EPCS4S28N Intel / Altera Corporation, Get familiar with the EPCS4S28N Serial Configuration (EPCS...
Buy EPCS4NI8N Intel / Altera Corporation, Get familiar with the EPCS4NI8N Serial Configuration (EPCS...
Buy EPCS4N955LX Intel / Altera Corporation, Get familiar with the EPCS4N955LX Serial Configuration (...
Buy EPCS4-I8N Intel / Altera Corporation, Get familiar with the EPCS4-I8N Serial Configuration (EPCS...
Buy EPCS4I8N Intel / Altera Corporation, Get familiar with the EPCS4I8N Serial Configuration (EPCS) ...
