The configuration data must be loaded each time an SRAM-based device is powered on in order to configure the system. When powered on, the flash memory device EPCS4SI8NAA may store configuration information for FPGA configuration. Every FPGA that supports the AS x1 configuration scheme is compatible with this EPCS4SI8NAA device. For an 8-pin SOIC package, you can move vertically from an EPCS1 device to an EPCS4 or EPCS16 device. For a 16-pin SOIC package, you can vertically switch between an EPCS64 device and an EPCS128 device. The new data decompression capability that is supported allows you to select which EPCS device to save the configuration data on when configuring your FPGA.
Supports active serial (AS) x1 configuration scheme
Easy-to-use four-pin interface
Low cost, low pin count, and non-volatile memory
Low current during configuration and near-zero standby mode current
IP and Smart camera
Video and night vision equipment
LTE radio and baseband
Multifunction printers
Automotive driver assistance
Driver information
| Specification | Value |
|---|---|
| Programmable Type | In System Programmable |
| Memory Size | 4MB |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40℃ ~ 85℃ |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
Buy EPCS4S28N Intel / Altera Corporation, Get familiar with the EPCS4S28N Serial Configuration (EPCS...
Buy EPCS4NI8N Intel / Altera Corporation, Get familiar with the EPCS4NI8N Serial Configuration (EPCS...
Buy EPCS4N955LX Intel / Altera Corporation, Get familiar with the EPCS4N955LX Serial Configuration (...
Buy EPCS4-I8N Intel / Altera Corporation, Get familiar with the EPCS4-I8N Serial Configuration (EPCS...
Buy EPCS4I8N Intel / Altera Corporation, Get familiar with the EPCS4I8N Serial Configuration (EPCS) ...
